productFeature

<li class="mv5"> AEC-Q100 Grade 1 Qualified<br /> </li><li class="mv5"> Compliance with ISO 26262 ASIL B<br /> </li><li class="mv5"> Power-On Built-In Self-Test (BIST) for OV/UV Monitors, I²C Cyclic Redundancy Check (CRC), and OTP Register CRC Protection<br /> </li><li class="mv5"> Three Step-Down Converters (HVBuck1, LVBuck2, and LVBuck3) with Peak-Current Mode PWM Operation and PSM Mode for Sentry Mode via I²C Setting<br /> - Fixed Switching Frequency at 2.1MHz<br /> - EMI Reduction Features including Spread Spectrum and Phase-Shift Operation<br /> - HVBuck1 Supports Input Voltage from 4V to 24V with Load Dump Protection (36V for ≤ 400ms Transient), Adjustable Output Voltage, and up to 1.5A Output Current<br /> - LVBuck2 and LVBuck3 Support Input Voltage from 2.7V to 5V, Adjustable Output Voltage, and up to 1.5A Output Current<br /> - Pins Related to LVBuck2/LVBuck3 Can Float if the Channel is Unused<br /> </li><li class="mv5"> Two Low-Dropout Regulators (LDO1 and LDO2)<br /> - LDO1 with 2.7V to 5V Input Voltage, Adjustable Output Voltage, up to 0.3A Output Current, and High PSRR with 0.1A Output Current (60dB at 100kHz, 40dB at 1MHz)<br /> - LDO2 with 2.7V to 5V Input Voltage, Adjustable Output Voltage, and up to 0.4A Output Current<br /> </li><li class="mv5"> Input and Output Functions<br /> - Sequence Control for External IC via SEQOUT <br /> - Power Status Indication via PGOOD<br /> - Error Status Indication via ERROUT<br /> - Two Error Signal Receivers via ERRIN1/ERRIN2<br /> - External Voltage Monitor via VMONIN<br /> </li><li class="mv5"> Small Form Factor<br /> - Wettable WET-WQFN-24AL 4x4 Package with Compact BOM <br /> </li><li class="mv5"> Junction Temperature Range: -40°C to 125°C<br /> </li><li class="mv5"> Ambient Temperature Range: -40°C to 125°C</li>