8
8
8
4
1rem
1rem
1rem
1rem
rt-dark-800
headline-3
false
Product Spec Name
true
basicInfoTitle
12
12
12
12
36
24
24
12
rt-dark-800
Product Spec Subtitle
basicInfoDescription
basicInfoImageSwitcher
<!-- Paste General Description -->The RTQ9126DH-QA is an ultra-low output noise, high- efficiency, two-channel class-D audio power amplifier. It delivers 2x75W into 4Ω at 10% THD+N from a 25V supply in automotive applications. It can achieve over 87% power efficiency with an output switching frequency of up to 2.1MHz for clarity, which enables a cost-optimized solution in a very small PCB size. Additionally, the RTQ9126DH-QA can be set either above the AM band, which eliminates the AM-band interference and reduces output filter size and cost, or below the AM band to optimize efficiency.The RTQ9126DH-QA is fully configurable through the I<sup>2</sup>C bus interface and features comprehensive diagnostics array specially designed for automotive applications.The built-in anti-pop functions can reduce the speaker’s pop noise under all kinds of scenarios. Its built-in protection circuits provide thermal fold-back, over-temperature, overcurrent, overvoltage, and undervoltage protections and report error status.The RTQ9126DH-QA is a 3-wire device that receives all clocks from external sources with standard I2S and TDM (Time-Division Multiplexing) formats. It supports a wide range of input sampling rates from 32kHz to 192kHz. The device is offered in a 64-pin RLQFP package with the exposed thermal pad facing up.The recommended junction temperature range is -40°C to 150°C, and the ambient temperature range is -40°C to 125°C.
/content/dam/richtek-eds/resources/product-specifications/rtq9/rtq9126dh-qa/images/circuit/t.svg
anchor
productDetailSection
i18n(anchor-tab.product-detail-section.title)
productDetailSectionAnchorTab
orderingInformationSection
i18n(anchor-tab.ordering-information-section.title)
orderingInformationSectionAnchorTab
technicalDocumentationSection
i18n(anchor-tab.technical-documentation-section.title)
technicalDocumentationSectionAnchorTab
designToolSection
i18n(anchor-tab.design-tool-section.title)
designToolSectionAnchorTab
applicationSection
i18n(anchor-tab.application-section.title)
applicationSectionAnchorTab
supportSection
i18n(anchor-tab.support-section.title)
supportSectionAnchorTab
24
24
24
24
i18n(tabs.product-detail.title)
productDetailTabs
i18n(tab-item.parameter-section.title)
parameterSection
parameterSectionTab
i18n(tab-item.package-size-pin-size-section.title)
packageSizePinsSizeSection
packageSizePinsSizeSectionTab
i18n(tab-item.product-feature-section.title)
productFeatureSection
productFeatureSectionTab
24
24
24
24
32
32
32
32
scrollable-table
parameterTable
normal-table
table-group
package-size-pins-size
packageSizePinsSizeTable
productFeature
<li class="mv5"> AEC-Q100 Grade 1 Qualified<br /> </li><li class="mv5"> I<sup>2</sup>S and TDM Input<br /> </li><li class="mv5"> 2x22W, THD + N = 1%, 4Ω, 14.4V<br /> </li><li class="mv5"> 2x27W, THD + N = 10%, 4Ω, 14.4V<br /> </li><li class="mv5"> 2x45W, THD + N = 10%, 2Ω, 14.4V<br /> </li><li class="mv5"> 2x75W, THD + N = 10%, 4Ω, 25V<br /> </li><li class="mv5"> THD + N is 0.03%<br /> </li><li class="mv5"> SNR up to 115dB<br /> </li><li class="mv5"> Ultra-Low Quiescent Current Mode<br /> </li><li class="mv5"> Ultra-Low Noise = 18μV<br /> </li><li class="mv5"> Low R<sub>DS_ON</sub> (80mΩ)<br /> </li><li class="mv5"> Switching Frequency up to 2.1MHz<br /> </li><li class="mv5"> Sampling Frequency from 32kHz to 192kHz<br /> </li><li class="mv5"> I<sup>2</sup>C Control with 16 Address Options<br /> </li><li class="mv5"> Built-In Anti-Pop Function <br /> </li><li class="mv5"> Built-In Thermal Fold-Back and Clip Detection<br /> </li><li class="mv5"> Load Diagnostics<br /> - Output Open Load and Short Load<br /> - Output Short to Power or Ground<br /> - DC and AC Coupled Load Detection<br /> </li><li class="mv5"> Protection Features<br /> - Output Short-Circuit <br /> - Overvoltage and Undervoltage<br /> - Overcurrent Warning and Protection<br /> - Over-Temperature<br /> - DC Offset Detection<br /> - 40V Load Dump<br /> </li><li class="mv5"> Ambient Temperature Range: -40°C to 125°C<br /> </li><li class="mv5"> Junction Temperature Range:-40°C to 150°C</li>
24
24
24
24
i18n(tabs.ordering-information.title)
orderingInformationTabs
i18n(tab-item.product-section.title)
productSection
productSectionTab
i18n(tab-item.evb-section.title)
evbSection
evbSectionTab
i18n(tab-item.ordering-detail-section.title)
orderingDetailSection
orderingDetailSectionTab
24
24
24
24
productImageSwitcher
/content/dam/richtek-eds/resources/product-specifications/rtq9/rtq9126dh-qa/images/ordering/o.svg
normal-table
card-list
products
productTable
evbImageSwitcher
AEM Editable Field - title
normal-table
card-list
evb
evbTable
orderingDetail
technical-documents
RTQ9126DH-QA
technicalDocumentMultipleTable
design-tools
RTQ9126DH-QA
designToolMultipleTable
32
56
56
56
rt-blue-800
i18n(text.application-title.text-content)
applicationTitle
withLine
24
24
24
24
<li class="mv5"> Automotive Head Units<br /> </li><li class="mv5"> In-Vehicle Infotainment<br /> </li><li class="mv5"> Automotive External Amplifier Modules</li>
applicationContent
35
35
35
35
Keyword 1
Keyword 2
56
56
56
56
i18n(support-cards.title)
supportCards
i18n(support-card-item.technical-support.title)
i18n(support-card-item.technical-support.description)
i18n(support-card-item.technical-support.learn-more-text)
i18n(support-card-item.technical-support.url)
technicalSupportCard
i18n(support-card-item.ordering.title)
i18n(support-card-item.ordering.description)
i18n(support-card-item.ordering.learn-more-text)
i18n(support-card-item.ordering.url)
orderingSupportCard
i18n(support-card-item.sales.title)
i18n(support-card-item.sales.description)
i18n(support-card-item.sales.learn-more-text)
i18n(support-card-item.sales.url)
salesSupportCard